BelowGrade
BelowGrade Below-Ground Waterproofing Systems for UAE & GCC Infrastructure Projects
Seamless spray-applied waterproofing for foundations, basements, podium decks, retaining walls and buried structures — supported with technical guidance for commercial and infrastructure projects across Dubai, the UAE and wider GCC markets.
System Overview
The Below-Ground Waterproofing System Within the Forti Nova GCC Range
BelowGrade is the specialist below-ground waterproofing system within the Liquid Coatings by Forti Nova GCC range. Designed specifically for foundations, basements, podium decks, retaining walls and buried concrete structures, BelowGrade delivers a seamless, permanently flexible, waterproof membrane through cold-applied spray application.
The system is a water-based, environmentally friendly two-component product. It is VOC-free, cold-applied with no heat or flame required, and achieves immediate cure — making it practical for confined below-ground environments where safety and speed of programme are critical priorities.
Designed For
Below-Ground Protection for Commercial & Infrastructure Projects
- Concrete basements and below-ground structures
- Foundations and footings
- Podium decks and parking decks
- Retaining walls and buried concrete
- Tunnels and underground infrastructure
- Buried utility and water infrastructure
- Below-grade commercial and mixed-use development
- Infrastructure projects requiring structural waterproofing
Dubai, UAE & GCC Relevance
Why Below-Ground Waterproofing Matters in UAE & GCC Infrastructure Projects
Commercial and infrastructure development across Dubai, the UAE and wider GCC markets involves significant below-ground construction. Foundations, basements, podium decks and buried structures are exposed to groundwater, salts and hydrostatic pressure — conditions that demand waterproofing systems with permanent flexibility, seamless coverage and long-term membrane integrity.
BelowGrade's spray-applied methodology enables rapid coverage across large below-ground areas — supporting programme continuity on large-scale commercial and infrastructure projects. The system's cold-applied nature and VOC-free formulation makes it practical in enclosed environments, while its flexibility and recovery performance address the movement inherent in large concrete structures over time.
Key Performance Advantages
Why Specify This System
Seamless Spray-Applied Membrane
Continuous membrane with no joints, laps or mechanical fixings — eliminating common failure points in below-ground waterproofing and providing uniform protection across complex geometries.
Cold-Applied System
No heat, no flame, no solvent — enabling safe and practical application in confined below-ground environments and reducing risk during application.
Rapid Application
Touch-dry within approximately 1 minute at 20°C. Additional protection or insulation can typically be applied around 20 minutes after application, supporting programme efficiency.
Water, Salt & Chemical Protection
Salt resistance passed at over 1,200 hours. Air permeability 0.0004 L/(s.m²) at 75 Pa. Designed for demanding groundwater and saline conditions present across many GCC project environments.
Flexible Long-Term Protection
850% elongation and recovery above 90% — enabling the membrane to accommodate substrate movement and thermal cycling throughout the structure's operational life.
Full Technical Support
Manufacturer-backed specification assistance, training support and project guidance available for commercial and infrastructure project teams across Dubai, the UAE and GCC.
Commercial Applications
Application Areas
Relevant Sectors
Sector Coverage
Technical Performance
System Facts
Manufacturer Support
Full Support From Manufacturer to Completion
Liquid Coatings by Forti Nova supports Dubai, UAE and GCC commercial project teams with more than product supply. Technical guidance, specification assistance, training support and project involvement are available where required, helping contractors, consultants and asset owners select and apply the correct system with confidence.
Discuss your project requirementsDownloads
Technical Documentation
Documentation available on request. Contact our technical team for project-specific technical data sheets, safety data sheets and certification documents.
Technical Data Sheet
Full system technical information including coverage, application, cure times and performance data.
RequestSafety Data Sheet
Component A and Component B safety information for correct site handling and storage.
RequestTwo-Component System Information
Application methodology, mixing ratios and equipment guidelines for two-component spray application.
RequestFAQs
Frequently Asked Questions
BelowGrade is a specialist spray-applied below-ground waterproofing system for foundations, basements, podium decks, retaining walls, parking decks and buried concrete structures. It is designed for commercial and infrastructure projects requiring seamless, flexible membrane waterproofing.
BelowGrade is a specialist spray-applied below-ground waterproofing system for foundations, basements, podium decks, retaining walls, parking decks and buried concrete structures. It is designed for commercial and infrastructure projects requiring seamless, flexible membrane waterproofing.
Yes. BelowGrade is specifically designed for below-ground concrete structures including basements, foundations, podium decks and buried infrastructure. The seamless spray-applied membrane provides continuous waterproof coverage without joints or mechanical fixings.
Yes. BelowGrade is specifically designed for below-ground concrete structures including basements, foundations, podium decks and buried infrastructure. The seamless spray-applied membrane provides continuous waterproof coverage without joints or mechanical fixings.
Yes. BelowGrade is a cold-applied system. No heat, flame or solvents are required during application — making it practical and safe for use in confined below-ground environments.
Yes. BelowGrade is a cold-applied system. No heat, flame or solvents are required during application — making it practical and safe for use in confined below-ground environments.
BelowGrade is typically touch-dry within approximately 1 minute at 20°C. Additional protection or insulation can usually be applied around 20 minutes after application. Full adhesion to substrate is typically achieved within approximately 48 hours.
BelowGrade is typically touch-dry within approximately 1 minute at 20°C. Additional protection or insulation can usually be applied around 20 minutes after application. Full adhesion to substrate is typically achieved within approximately 48 hours.
Yes. The spray application methodology enables output of 600m²+ per day depending on project conditions, access, preparation and trained application setup — making it suitable for large-scale commercial and infrastructure projects where programme continuity is important.
Yes. The spray application methodology enables output of 600m²+ per day depending on project conditions, access, preparation and trained application setup — making it suitable for large-scale commercial and infrastructure projects where programme continuity is important.
Yes. Liquid Coatings by Forti Nova provides technical guidance, specification assistance, training support and project consultation for commercial and infrastructure project teams across Dubai, the UAE and wider GCC markets. Contact our team to discuss your project requirements.
Yes. Liquid Coatings by Forti Nova provides technical guidance, specification assistance, training support and project consultation for commercial and infrastructure project teams across Dubai, the UAE and wider GCC markets. Contact our team to discuss your project requirements.
Regional Coverage
Dubai, UAE & GCC Regional Pages
Get in Touch
Discuss BelowGrade for Your Dubai, UAE or GCC Project
Contact our technical team for specification guidance, system selection support and project-specific technical assistance.
